1,Mode Indicator: When the indicator is on, the splitter is in 1-in-8-outmode, the signals output to OUTPUT 1-4 come from INPUTA (INPUT Bhas no effect).
When the indicator is off, the splitter is in A-in-4-out and B-in-4-outmode, the signals output to OUTPUT 1-4 come from INPUT A, thesignals output to OUTPUT 5-8 come from INPUT B
2,RDM Indicator: When RDM signal is detected, the indicator light will be on
3,OUTPUT connectors: used to output DMX512 and RDM signals to thelighting equipment.
4,OUTPUT Indicator: Indicates that the output port (1-8) is output normal lywhen the light is on.
5,POWER indicator: indicates the power status of the splitter, and is alwayson when it is powered on normally
6,Powerswitch:used to switch the splitter on or off.
7,AC IN: used toinputAC88~256V150~60Hz power(MAX.12A).
8,AC OUT: used to outputAC88-256V/50~60Hz power(MAX.12A)
9,THRU A /INPUTA: THRU A passes through the DMX512 and RDM signalsto the next splitter, INPUTAis used to input DMX512 and RDM signals.
10,Mode Selection: When the Mode Selection is dialed to the Mode 1, thesplitter is in 1-in-8-out mode, the signals output to OUTPUT 1-4 come fromINPUTA(INPUT B has no effect).When the Mode Selection is dialed to the Mode 2, the splitter is in A-in-4-outand B-in-4-out mode, the signals output to OUTPUT 1-4 come from INPUT Athe signals output to OUTPUT 5-8 come from INPUT B.
11,THRU B/INPUT B: THRU B passes through the DMX512 and RDM signalsto the next splitter, INPUT B is used to input DMX512 and RDM signals.
Audited Supplier 
){kind=link}